MSI KT3 Ultra Manuel d'instructions télécharger pdf (Page 75)

3-30

KT3 Ultra-C ATX Mainboard

Set Supervisor/User Password

When you select this function, a message as below will appear on the screen:

Type the password, up to six characters in length, and press <Enter>. The

password typed now will replace any previously set password from CMOS

memory. You will be prompted to confirm the password. Retype the pass-

word and press <Enter>. You may also press <Esc> to abort the selection and

not enter a password.

To clear a set password, just press <Enter> when you are prompted to enter

the password. A message will show up confirming the password will be

disabled. Once the password is disabled, the system will boot and you can

enter Setup without entering any password.

When a password has been set, you will be prompted to enter it every time

you try to enter Setup. This prevents an unauthorized person from changing

any part of your system configuration.

Additionally, when a password is enabled, you can also have AMIBIOS to

request a password each time the system is booted. This would prevent unau-

thorized use of your computer. The setting to determine when the password

prompt is required is the PASSWORD CHECK option of the ADVANCED

BIOS FEATURES menu. If the PASSWORD CHECK option is set to Always,

the password is required both at boot and at entry to Setup. If set to Setup,

password prompt only occurs when you try to enter Setup.

MSI Reminds You...

About Supervisor Password & User Password:

Supervisor password: Can enter and change the settings of

the setup menu.

User password: Can only enter but do not have the

right to change the settings of the setup

menu.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 94 95

Pas de commentaire

MSI KT3 Ultra Manuel d'instructions Page 75