MSI 865PE Neo Manuel d'instructions télécharger pdf (Page 102)

MS-6728 ATX Mainboard

B-2

Introduction

Following are the Parallel ATA (P-ATA) and Serial ATA (S-ATA) device

configurations supported by Intel ICH5R.

ATA Operate Mode

There are two modes to select: Legacy mode and Native mode.

Legacy Mode:

--- In this mode, system BIOS just assign the traditional 14 and 15 IRQs

to use for HDD.

--- Older OSs that do not support switch to Native Mode (DOS, Win98/

ME...) should set SATA and PATA to Legacy Mode.

--- Maximum 4 ATA devices to connect.

--- Combine mode and Non-Combine mode.

h Non-Combined Mode: P-ATA devices only .

Maximum of 4 devices.

h Non-Combined Mode: S-ATA devices only.

Maximum of 2 devices.

h Combined Mode: S-ATA devices

P-ATA devices

Maximum of 2 devices each, thus total 4 devices

at maximum.

Native Mode:

--- In this mode, system BIOS will search all available IRQs to use for HDD.

--- New OS that support switch to Native Mode (WinXP, Win2K) can set

SATA and PATA to Native Mode.

--- Comprehend both Legacy and/or Native Modes.

--- Maximum 6 ATA devices to connect (4 for P-ATA & 2 for S-ATA).

MSI Reminds You...

BIOS provides a BIOS setup option for Native Mode or Legacy

Mode user selection. Please refer to P.3-23 On-Chip IDE

Configuration for details.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 147 148

Pas de commentaire

MSI 865PE Neo Manuel d'instructions Page 102