MSI 865PE Neo3-F Manuel d'utilisateur télécharger pdf (Page 23)

iPoint NVR v5.16 Server Manual

Figure1-3-9

【

Selected Camera】Select the camera from the drop-down list to set the parameters for it.

【PTZ Port】Selects PTZ communication port. Choose “No Com” for no PTZ, or Com 1, 2 for PTZ.

【PTZ Protocol】Selects the PTZ protocol for the PTZ camera.

【PTZ Address】Allows the installer or user to set the camera ID number corresponding of the

PTZ camera being controlled. Note: The PTZ camera typically has a bank of dip switches allowing

the setup of PTZ address. Both the PTZ camera ID number and the corresponding number in

this

box need to match.

【PTZ Baudrate】Selects PTZ Baudrate for the PTZ camera.

【PTZ Position】PTZ Position is a setting designed to aid in the control of a PTZ camera, it allows

the PTZ camera to be installed “upside down”, requiring that the resulting video image be flipped or

inverted, thereby the control which is synchronized with the camera direction works.

Notes:

1. PTZ position will influence PTZ control. e.g.: if you set as obverse and press left, then it will turn left.

If you set as inverse and press left, then it will turn right.

2. If there is (H) after the PTZ protocol, it has the function of high speed Preset. If there is no (H), then

it only has the function PTZ control.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

Pas de commentaire

MSI 865PE Neo3-F Manuel d'utilisateur Page 23