Msi X99S GAMING 7 Manual Manuel d'utilisateur télécharger pdf (Page 47)

Chapter 1

1-33

Getting Started

Jumper

JBAT1: Clear CMOS Jumper

There is CMOS RAM onboard that is external powered from a battery located on the

motherboard to save system conguration data. With the CMOS RAM, the system can

automatically boot into the operating system (OS) every time it is turned on. If you

want to clear the system conguration, set the jumpers to clear the CMOS RAM.

BAT1

Keep Data Clear Data

Important

You can clear the CMOS RAM by shorting this jumper while the system is o.

Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on

because it will damage the motherboard.

JSLOW1: Slow Mode Booting Jumper

This jumper is used for LN2 cooling solution, that provides the extreme overclocking

conditions, to boot at a stable processor frequency and to prevent the system from

crashing.

BAT1

EnabledNormal

(Default)

(Please enable this

jumper during BIOS

POST.)

Important

•

Users will try extreme low temperature overclocking at their own risks. The

overclocking results will vary according to the CPU version.

•

Please don’t set this jumper to “Enabled” when power-o or the system will be un-

bootable.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 111 112

Pas de commentaire

Msi X99S GAMING 7 Manual Manuel d'utilisateur Page 47