MSI Eclipse PLUS - Motherboard - ATX Manuel d'utilisateur télécharger pdf (Page 106)

C-3

Intel ICH10R SATA RAID

BIOS Configuration

After the above message shows, press <Ctrl> and <I> keys simultaneously to enter

the RAID Configuration Utility.

Important

The “Drvice Model”, “Serial #” and “Size” in the following example might be

different from your system.

Important

The following procedure is only available with a newly-built system or if you

are reinstalling your OS. It should not be used to migrate an existing system

to RAID.

The Intel Matrix Storage Manager Option ROM should be integrated with the system

BIOS on all motherboards with a supported Intel chipset. The Intel Matrix Stroage

Manager Option ROM is the Intel RAID implementation and provides BIOS and DOS

disk services. Please use <Ctrl> + <I> keys to enter the “Intel(R) RAID for Serial ATA”

status screen, which should appear early in system boot-up, during the POST

(Power-On Self Test). Also, you need to enable the RAID function in BIOS to create,

delete and reset RAID volumes.

Using the Intel Matrix Stroage Manager Option ROM

1. Creating, Deleting and Resetting RAID Volumes:

The Serial ATA RAID volume may be configured using the RAID Configuration utility

stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the

following message will appear for a few seconds:

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 157 158

Pas de commentaire

MSI Eclipse PLUS - Motherboard - ATX Manuel d'utilisateur Page 106