MSI 865PE Neo Manuel d'instructions télécharger pdf (Page 90)

A-4

MS-6728 ATX Mainboard

After installing the audio driver, you are able to use the 4-/6-channel

audio feature now. To enable 4- or 6-channel audio operation, first connect 4 or

6 speakers to the appropriate audio connectors, and then select 4- or 6-channel

audio setting in the software utility.

There are two ways to utilize the function and connect the speakers to

your computer:

 Use the optional S-Bracket. If your motherboard supports S-Bracket

and you have installed S-Bracket in the computer, you can connect

two speakers to back panel’s Line-Out connector, and the rest of

speakers to S-Bracket.

 Use the back panel only (without S-Bracket). If you do not have

a S-Bracket, you can connect all speakers to the audio connectors

on the back panel.

After installing the C-Media drivers, you can attach the speakers for 4-

/6-channel audio output. Always connect the speakers to the LINE OUT

connectors. Different connector configurations for 2-/4-/6-channel operations

are listed below:

Hardware Configuration

2-Channel

In 2-channel configuration,

Line Out, Line In and MIC

functions all exist.

4-Channel 6-Channel

When set to 4-channel

configuration, LINE IN

function DOES NOT

WORK any more.

When set to 6-channel

configuration, LINE IN

and MIC functions DO

NOT WORK anymore.

MIC

Line In

Line Out

MIC

Line Out

Line In

MIC

Line Out

Line In

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 117 118

Pas de commentaire

MSI 865PE Neo Manuel d'instructions Page 90