MSI K8T Neo-V Manuel d'instructions télécharger pdf (Page 36)

2-17

Hardware Setup

The mainboard provides connectors to connect to FDD, IDE HDD, case,

modem, LAN, USB Ports, IR module and CPU/System/Power Supply FAN.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that

supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

Connectors

FDD1

IrDA Infrared Module Header: JIR1

The connector allows you to connect to IrDA Infrared module. You

must configure the setting through the BIOS setup to use the IR function.

JIR1 is compliant with Intel

Front Panel I/O Connectivity Design Guide.

JIR1

Pin Signal

1NC

2NC

3 VCC5

4 GND

5 IRTX

6 IRRX

Chassis Intrusion Switch Connector: JCASE1

This connector is connected to a 2-pin chassis switch. If the chassis is

opened, the switch will be short. The system will record this status and show a

warning message on the screen. To clear the warning, you must enter the BIOS

utility and clear the record.

JCASE1

GND

CINTRU

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 85 86

Pas de commentaire

MSI K8T Neo-V Manuel d'instructions Page 36