MSI MS-8801 Guide de l'utilisateur télécharger pdf (Page 58)

3-15

BIOS Setup

mode (0-4) for each of the four IDE devices that the onboard IDE interface

supports. Modes 0 through 4 provide successively increased performance.

In Auto mode, the system automatically determines the best mode for

each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3,

Mode 4.

Primary/Secondary Master/Slave UltraDMA

Ultra DMA/33 implementation is possible only if your IDE hard drive

supports it and the operating environment includes a DMA driver

(Windows 95 OSR2 or a third-party IDE bus master driver). If your hard

drive and your system software both support Ultra DMA/33, Ultra DMA/

66 and Ultra DMA/100 select Auto to enable BIOS support. The settings

are: Auto, Disabled.

IDE DMA Transfer Access

This item allows users to enable or disable the DMA transfer function of

the IDE hard drive. The settings are: Enabled, Disabled.

SIS OnChip PCI Device

Press <Enter> to enter the sub-menu and the following screen appears:

SIS USB Controller

This setting is used to enable/disable the onboard USB controller. Set-

ting options: Disabled, Enabled.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 82 83

Pas de commentaire

MSI MS-8801 Guide de l'utilisateur Page 58