MSI RG300EX LITE Guide d'installation télécharger pdf (Page 27)

MSI RG300EX（Lite)

3.7 Connecting the RG300EX（Lite)

1. Turn off the computer.

2. Connect the RG300EX（Lite) to a wall outlet using the supplied power adapter.

3. Connect the supplied UTP network cable to the ‘LAN 4’ port of the RG300EX（Lite).

4. Connect the other end of this UTP network cable to the network adapter of your computer.

Is my RG300EX（Lite) correctly connected to the wall outlet? You can check this by verifying that the

POWER LED is on or not.

Do I have a proper network connection? Turn on the computer and verify if the LED on the RG300EX

（Lite), corresponding with the LAN-port to which you connected the UTP networking cable, is lit. The

LED on the network adapter of your computer should also be lit.

3.8 Configuring the RG300EX（Lite) as an Access Point

Before you can configure the RG300EX（Lite) for an Internet connection you first need to connect to the

RG300EX（Lite) by following the procedure below.

1. Turn on your computer.

2. Open your web browser (e.g. Internet Explorer, Netscape of Firefox).

3. Type ‘http://192.168.0.1’ in the address bar.

4. Press the ‘Enter key’ or click ‘Go to’. You will now be asked for a ‘Username’ and a ‘Password’. Fill in

‘admin’ in the ‘Username’ field and ‘admin’ in the ‘Password’ field and press the enter key.

5. Click ‘Setup Tool’.

Page 26 of 52

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 52 53

Pas de commentaire

MSI RG300EX LITE Guide d'installation Page 27