MSI K8N Neo-V2 Manuel d'instructions télécharger pdf (Page 58)

3-17

BIOS Setup

IDE Function Setup

Press <Enter> to enter the sub-menu and the following screen appears:

OnChip IDE Channel 0

The integrated peripheral controller contains an IDE interface with support

for two IDE channels. Choose [Enabled] to activate each channel separately.

Settings: [Enabled], [Disabled].

both support Ultra DMA/33, Ultra DMA/66 and Ultra DMA/100 select Auto to

enable BIOS support. The settings are: [Auto], [Disabled].

OnChip IDE Channel 1

The integrated peripheral controller contains an IDE interface with support

for two IDE channels. Choose [Enabled] to activate each channel separately.

Settings: [Enabled], [Disabled].

IDE DMA Transfer Access

This item is used to enable or disable the DMA transfer function of the IDE

Hard Drive. The settings are: [Enabled], [Disabled].

SATA1/SATA2 & SATA3/SATA4

This item is used to enable or disable onchip SATA controller. The settings

are: [Enabled], [Disabled].

EPP Mode Select

The onboard parallel port is EPP Spec. compliant, so after the user chooses

the onboard parallel port with the EPP function, the following message will

be displayed on the screen: “EPP Mode Select.” At this time either [EPP 1.7]

spec or [EPP 1.9] spec can be chosen.

ECP Mode Use DMA

The ECP mode has to use the DMA channel, so choose the onboard parallel

port with the ECP feature. After selecting it, the following message will

appear: “ECP Mode Use DMA.” At this time, the user can choose between

DMA channel [3] or [1].

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 134 135

Pas de commentaire

MSI K8N Neo-V2 Manuel d'instructions Page 58