MSI K8N Neo-V2 Manuel d'instructions télécharger pdf (Page 62)

3-21

BIOS Setup

PNP/PCI Configurations

This section describes configuring the PCI bus system and PnP (Plug & Play)

feature. PCI, or Peripheral Component Interconnect, is a system which allows I/O

devices to operate at speeds nearing the speed the CPU itself uses when communi-

cating with its special components. This section covers some very technical items

and it is strongly recommended that only experienced users should make any changes

to the default settings.

Resource Controlled By

The Award Plug and Play BIOS has the capacity to automatically configure all of the

boot and Plug and Play compatible devices. However, this capability means abso-

lutely nothing unless you are using a Plug and Play operating system such as Win-

dows

95/98. If you set this field to [Manual], choose specific resources by going into

each of the sub menu that follows this field (a sub menu is preceded by a “`”). The

settings are: [Auto (ESCD)], [Manual].

IRQ Resources

The items are adjustable only when Resources Controlled By is set to [Manual].

Press <Enter> and you will enter the sub-menu of the items. IRQ Resources list IRQ

3/4/5/7/9/10/11/12/14/15 for users to set each IRQ a type depending on the type of

device using the IRQ. Settings are:

[PCI Device] For Plug & Play compatible devices designed for PCI bus

architecture.

[Reserved] The IRQ will be reserved for further request.

Primary Graphic’s Adapter

This item specifies which graphic card is your primary graphics adapter. Settings:

[First PCIE], [PCI Slot].

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 134 135

Pas de commentaire

MSI K8N Neo-V2 Manuel d'instructions Page 62