MSI K8N Neo-V2 Manuel d'instructions télécharger pdf (Page 61)

3-20

MS-7125 ATX Mainboard

Power Button Function

This feature sets the function of the power button. Settings are:

[Power Off] The power button functions as normal power off button.

[Suspend] When you press the power button, the computer enters the

suspend/sleep mode, but if the button is pressed for more

than four seconds, the computer is turned off.

Restore On AC Power Loss

This item specifies whether your system will reboot after a power failure or interrupt

occurs. Available settings are:

[Off] Always leaves the computer in the power off state.

[On] Always leaves the computer in the power on state.

[Last State] Restores the system to the status before power failure

or interrupt occurred.

Wake-Up Event Activity

Press <Enter> and the following sub-menu appears.

Resume S3 by PS2/Keyboard, Resume S3 by PS2/Mouse

These fields allow the activity of the PS2 (keyboard and mouse) to wake up the

system from S3 sleep state. Settings: [Enabled], [Disabled].

Resume By PCI Device PME#

When set to [Enabled], the feature allows your system to be awakened from the

power saving modes through any event on PME (Power Management Event).

Settings: [Enabled], [Disabled].

Resume By RTC Alarm

The field is used to enable or disable the feature of booting up the system on a

scheduled time/date. Settings: [Enabled], [Disabled].

Date

The field specifies the date for Resume By RTC Alarm. Settings: [0]~[31].

HH:MM:SS

The field specifies the time for Resume By RTC Alarm. Format is <hour>

<minute><second>.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 134 135

Pas de commentaire

MSI K8N Neo-V2 Manuel d'instructions Page 61